Dash Z Racing Blog
DashZRacing Phone Number 8776414829

This is a DIY installation guide for installing the 03-07 Honda Accord Halo LED Projector Headlights.  In this installation, Dashzracing will step by step explain how to install these headlights properly with pictures.  Before the installation, please take a second and check out Dashzracing’s collection for 2003-2007 Honda Accord Halo LED Projector Headlights.  You can find chrome housing and black housing available at Dashzracing storefront.

03-07 Honda Accord Halo LED Projector Headlights – Black

03-07 Honda Accord Halo LED Projector Headlights – Chrome

03-07 Honda Accord Halo LED Projector Headlights – Black

03-07 Honda Accord Halo LED Projector Headlights – Chrome

03-07 Honda Accord Halo Projector Headlights – Black

03-07 Honda Accord Halo Projector Headlights – Chrome

step 1 Take off the plastic cover by remove 10 clips as shown in the pictures

step 2 Remove 4 Clips and 6x10mm bolts

step 3 Remove the hidden screw on each side that between the fender and the bumper piece

step 4 Gently tuck on the side and remove the bumper a little bit

Step 5 Unplug the harness on the fog lights

Step 6 Once the harness is unplug, then we can remove the whole bumper

Step 7 Remove 5 screws as indicated by the red arrows

Step 8 Pull the headlights out and unplug all the headlight harnesses

Step 9 Remove the bracket right below the headlights

Step 10 Install the bracket on the new projector headlights

Step 11 Check out the Wire halo instruction article for details about how to wire the halo and LED

Led & Halo Projector Headlight Installation DIY Wiring

Step 12 Plug back in all the harnesses in the new headlights

Step 13 Put back all the screws remove before and plug back the fog lights harness

Step 14 Put back the front bumper and the front top shield

Step 15 Check all the lighting before go on the road

Step 16 The installation is now completed

Popularity: 9% [?]

Comments are closed.