This DIY installation guide will help you install 2003-2006 Chevy Silverado tail lights from Dash Z Racing. This guide will show you step by step so you will have a easy understanding of how to install your brand new tail lights. The 2003-2006 Chevy Silverado tail lights are available in chrome and black housing but the installation is all the same. Please follow the instructions below.
Before you start make sure the vehicle is turned off and the negative is removed from the battery. Begin at the rear of the vehicle.
First thing, remove the two screws circled in the picture. It does not matter which one you start with. Then gently pull the tail lights away from the rear.
Next, remove the all sockets by turning them counter clockwise and pulling them out one at a time.
In the next step, you will need to cut the black electrical tape from t he stock setup to make it reach in the new tail lights. Please make sure you do not cut into the wires. Pull the wires gently to extend.
Now, take your new tail light and start putting the sockets into it. Lock them in by turning them clockwise. After, group the wires together and tape them up with electrical tape.
Finally, you can place the new tail light into the vehicle and screw in the two screws you removed earlier. Repeat the process for the other side and make sure to test before using. Installation complete.
Popularity: 6% [?]