Everyone, today I am writing a simple license plate frame installation. But be warned: The following instructions are given for informative purposes only. Try at your own risk. Dash Z Racing is not responsible for damages because of this process.
Before installation I highly recommend that you purchase a license plate security screw kit from any auto parts store before you get started to prevent theft.

Step 1. Start by inserting the plastic washers into the screws.

Step 2. This is the easiest part, insert the license plate into the license plate frame.
Step 3. Check if the screw holes on your vehicle are at the top or bottom of plate. If the screw holes on your vehicle’s license plate frame is on the top of license plate, then insert the two slotted head screws into the bottom two holes of your license plate and hold these in place with the hexagon nuts. If the screw holes are on the bottom revise the process.

Step 4. Mount the license plate frame with license plate to on the vehicle using the 2 Phillips head screws with plastic washers.

Step 5. Cap the color coded screw caps over plastic washers. Make sure to get it there tight with a click sound. It’s that simple.

Popularity: 2% [?]












