Considering to make a change to your Ford F-150/Expedition/F-250/F-350 frontend? Don’t want to spend high value in buying same set of OEM headlights? A stunning set of aftermarket projector headlight is always a best choice in quality and value.

DashZRacing is proud to have several popular items for your variety choices:

These lights are really nice units as they come with all the necessary components: light bulbs, turn signals, and the halo rings.

We got a lot of phone calls from customer asking how to install these stunning lights, we would like to share some installation instruction here. (Warning Disclaimer: The following instructions are given for informative purposes only. Try at your own risk. DashZRacing is not responsible for damages because of this process. All installation damage will not be covered under extended warranty plan.)

Before installing the projector headlights, you will need to remove the factory headlight unit first. The Ford company made it very simple for us, you just have to remove the plastic screw that holds the splashguard in place, and then removed the three (10mm) bolts. After lifting the plastic lock tab off of the fender, the factory headlight unit slides right out. And then Disconnect the three plugs; low-beam, high-beam, and turn signals.

And then you can install the projector headlight in the opposite way that the factory lights are removed. Since DashZRacing has six different lights variety, there may be some differences in wiring location. You must manually wire the row of turn signals along the bottom of the projector headlights. Here are some simple instructions for your reference:

1. Remove the plastic screws holding on the splashguards on the top inner portion

2. Remove the three bolts that hold each of the factory F-150 headlights on.

3. Unclip the plastic lock tab located next to the top headlight bolt on the fender.

4. Remove the factory F150 headlight and disconnect the headlight and turn signal plugs.

5. Ready to install the aftermarket halo projector headlight

6. Plug the headlight and turn signal back in. After setting the projector headlight into the right place, bolt them down.

It’s done!

Please feel free to contact our Sales Representative if you have any questions.

DashZracing also also carries the following items for 04~07 Ford F150/Expedition/F-250/F-350:

Popularity: 9% [?]