Dash Z Racing Blog
DashZRacing Phone Number 8776414829

Installation Guide for 2010-2011 Toyota Prius LED Tail Lights

Posted by Ingar Charlie Bordi On February - 28 - 2011

If you have read our previous article about the 2010-2011 Toyota Prius LED Fiber Optic LED Tail lights, this article is a more detailed installation guide for these 2010-2011 Prius Tail lights.

2010 2011 Toyota Prius LED Tail Lights2010 2011 Toyota Prius LED Tail Lights Red Clear

Tools Recommended for installing the 2010-2011 Toyota Prius LED Tail Lights

– 1/4″ Drive Ratchet
– 10mm Socket
– Handy remover
– Phillips Screwdriver

1. Lift up the Trunk Tray Cover, and Side Tray covers

2. Remove Plastic Put that holding the Side Tray, and remove side tray afterward

3. Remove Phillips Head Screw on the side panel

4. Remove the rubber weatherstrip loose by pulling it gently

5. Remove the plastic moulding

6. Remove 10mm Bolt and Latch on the inside trunk

7. Pull the interior liner loose so you have full access to the back of your tail lights

8. Remove two 10mm bolts indicated by the arrows

9. Remove a 10mm clip under your fender located in the rear

10. Remove the phillips head screw located at the rear bumper

11. Gently Pull sides of rear bumper loose

12. Remove tail lights and unplug the harness

13. Plug in the new aftermarket tail lights, and put back all screws and clips, and YOU ARE DONE!

Popularity: 5% [?]

Comments are closed.