
Today I’m going to show everyone how to install a Chrome Gas Door Cover. Installation is simple and pretty much all the same for Ford, Dodge, and Chevy. But be warned: The following instructions are given for informative purposes only. Try at your own risk. Dash Z Racing is not responsible for damages because of this process.
Check out Dash Z Racing Installation Help for other DIY installs
Tools To Get The Job Done
- Torx bit (T30)
- 4mm Allen key
Step 1. Remove the stock gas door on the vehicle. You will need to remove the 2 screws holding the stock gas door to the vehicle.


Step 2. If your truck or vehicle has rubber door stops, remove them.


Step 3. Take the new gas door and align the holes. Make sure you leave all of the nuts loose until you have them all started and lined up the way you want.


Step 4. Finally, tighten up the four (4) bolts and you are done.




Popularity: 3% [?]










